Wireless Printer setup

123 HP ojpro8716 Windows

Print the documents or images with easily. You can print from handheld devices from anywhere at any time. Configure the printer on a wireless network, link the printer to the network and then setup the 123 HP ojpro8716 printer driver and software from our website. Select the wireless connection when it is instructed during the installation.

Step 1 : Prep for the installation

Before configuring the printer on the wireless network, gather the required network name and password, and then switch on the printer, router and system.

  • Meet the requisites:
  • It is necessary to have the network name and the network password.
  • Connect the system and the printer to the same wireless network.
  • Acquire broadband Internet access.
  • Switch on the router and the computer and then place the printer and the system at a closer distance.
  • Unplug any USB or Ethernet cable from the printer.

Step 2 : Link to the wireless network

Fix the printer to the network with the Wireless Setup Wizard so that the HP installer can detect the printer during the installation process.

  • Open the Dashboard from the printer’s control panel and then choose the Wireless icon.
  • Select the Setup icon.
  • Click Wireless Setting, and then tap Wireless Setup Wizard.
  • From the list of available networks choose the printer name, and then click Ok.
  • In case the list does not hold your network name, choose Enter New Network Name, and then use the displayed instructions to index the network name.
  • If it is urged, type the WEP or WPA key, and then choose Done.

Step 3 : Download and install the updated printer driver

Download and setup the upgraded version of the printer full feature software from our website. During installation, if an Auto Wireless Connect screen prompts, make use of it and then finish the wireless setup.

  • Select your printer from the list.
  • Index the corresponding printer model number, and then choose Begin.
  • Select Download, and then click Open, Save or Run option in any windows and then download the driver to your system.
  • Double-tap the printer driver file to launch the driver installation.
  • Go through the guides to complete the connection setup and the printer driver installation.
  • If you have further queries, ring us on our toll-free number and acquire an instant solution from our technical experts.

Mac

You can avail an instant print even when you are away from your Mac device and save your precious time using this simple procedure which is listed below: Connect the printer over the wireless network and then download and setup the necessary printer driver and software from our website. Choose Wireless connection type during the installation.

Step 1 : Get ready for the installation process

Keep your network name and password ready, while configuring the printer on the wireless network.

  • Collect the corresponding network name and network password. Link your printer and the computer to the same wireless network. Use a broadband Internet access.
  • Turn on your computer and the router, and position your router and the computer at a closer distance.

Step 2 : Associate the printer to the wireless network

Add your printer to your network with the Wireless Setup Wizard so that the HP installer can detect the printer during the installation process.

  • From the control panel of the printer, scroll down to open the Dashboard, and then select the Wireless icon.
  • Choose the Setup icon.
  • Select Wireless Settings, and then click Wireless Setup Wizard.
  • Select the name of your network in the provided list, and then choose Ok.
  • In case the provided list does not contain your network name, choose Enter New Network Name, and then make use of the instructions displayed on the screen to index the network name.
  • If required, enter the WEP or WPA key, and then click Done.

Step 3 : Download and setup the printer driver

Download and setup the updated printer driver from our website, and make your printer ready to print your document. In case an Auto Wireless Connect screen pops up during installation, make use of it to complete the wireless setup.

  • Turn on your HP printer.
  • Unplug the USB cable from the system.
  • Pick out your printer from the available list.
  • If necessary, pick a method to detect the printer model, and then go through the guidance to navigate to the download page.
  • Choose Download next to HP Easy Start or next to full feature printer driver, according to the option which is listed.
  • On the Mac dock, open downloads folder and then select the HP Easy Start file or the full feature printer driver .dmg file to start with the installation.
  • Go through the instructions to configure the printer connection and install the printer software.
  • When it is instructed by the installer, select Add Printer to generate a print queue on the Mac device.
  • Select your printer name, choose the Use or Print Using menu, Pick out your printer name in the pop-up menu, and then choose to Add option.
  • Go back to the HP installer to finish the installation process.

If you have any troubles, consult our tech support on our toll-free. They fix and troubleshoot your issue within a short span of time and get your printer ready to print your document.

Wired network setup for Windows

Wired printing is stable, it is harder to interrupt and it does not interference much with another device.

Setup a network connected printer with an Ethernet cable by installing the printer driver on a Windows system. Just take a glance at a procedure which is listed below:

Step 1: Prep for the driver installation and network connection

Confirm that you have the proper router and an Ethernet cable, prior to installing the printer driver.

  • Connect your computer to the router, switch or hub.
  • Acquire an Ethernet cable.

Step 2 : Connect the printer to the network

  • Select your printer name, choose the Use or Print Using menu, Pick out your printer name in the pop-up menu, and then choose to Add option.
  • Remove the protective plug from the HP printer Ethernet port.
  • Fix the Ethernet cable to the printer port, and then connect the other end of the cable to an accessible port on the network router, switch or hub.

Step 3: Software setup

Plug the Ethernet cable to your printer and to the router, switch or hub so that your printer can be detected during the installation process.

  • Select your printer name, choose the Use or Print Using menu, Pick out your printer name in the pop-up menu, and then choose to Add option.
  • Go back to the HP installer to finish the installation process. Go to our website, enter the corresponding printer model, and then use the instructions to download the    printer driver.
  • Under driver printer installation software, choose Download next to the full feature driver, click Download only option to save and then activate the driver file from your system.
  • When it is instructed by the installer to select a printer connection option, select Wired Network to continue with and complete the Setup process.
  • Attempt to print, scan or fax, based on your printer functionality.

Give a call on our toll-free number to resolve your issues, our technical team offers you an instant solution for your issues.

Wired network setup for Mac device

Wired network is reliable and it provides a required speed without getting affected by the environment. Install the 123 HP ojpro8716 printer driver and software to setup the printer on a wired network connection.

Step 1: Organize for the driver installation and network connection

Prior to installing the 123 HP ojpro8716 printer driver, confirm that you have a proper network router, switch and an Ethernet cable.

  • Connect the computer to the router, switch or hub.
  • Avail an Ethernet cable.

Step 2 : Link the corresponding printer to the network

Plug the Ethernet cable to the printer and to the router, switch or hub so that you can find your printer during installation.

  • Turn on your printer.
  • Take off the protective plug from the printer Ethernet port.
  • Fix the Ethernet cable into the printer port, and then plug the other end of the cable to an accessible port on the network router, switch or hub.

Step 3: Software installation

  • Get directed to our website, index your printer model, and then select Begin.
  • Click Software and Driver downloads, enter your printer model and then ensure the operating system version is proper.
  • Under Driver Printer Installation Software, select Download, based on the option it gets displayed and then access the .dmg file in downloads folder to begin the installation.
  • When it is instructed by the installer, select Add Printer to initiate a print queue on the Mac device.
  • Select your printer name, tap Use or Print Using menu, choose your printer name in the pop-up list, and then click Add.
  • Go back to the HP installer to finish the installation process.

For more details, ring us on our toll-free number, our technical experts are here to guide you in all kinds of queries.

Troubleshooting

Printer is offline

Sometimes, when you want to print the document or image, you might receive a printer offline notification which affects your printer print job. Go through the procedure which is listed below to overcome your 123 HP ojpro8716 printer offline issues.

Detect the problem automatically

HP Print and Scan Doctor easily identifies and resolves the printing issue.

  • 1. Double-tap the HP print and Scan Doctor to open the tool on your system.
  • 2. Choose Start on the Welcome screen.
  • 3. Choose your printer, and then select Next.

Finding and Fixing Problems window gets screened.

  • 4. Select the Fix Printing option.
  • 5. You can view the list of the actionable result on the HP print and Scan Doctor result screen.
    • In case you detect a White checkmarks, the printer passed the test. Select Test Print or click Skip.
    • In case you find a White wrench, Print and Scan Doctor identifies an issue and resolves it. Select Test Print or click Skip.
    • In case you find a Yellow exclamation points, the test is failed and it requires user action, but the step was skipped. Click Test Print or click Skip.
    • In case you find a red X, use the guides to rectify the problem.

    If an issue still exists, follow the next step.

    Guidelines to resolve the problem manually

    • Fix the default printer and unpause the printing.
    • Restart the printer and then verify the connection status.
    • Confirm that the correct port is selected.
    • Try to connect the printer to the network manually.
    • Add an additional printer to Windows.
    • Employ HP Printer Assistant reinstall your printer.

    If you still detect the problem in your 123 HP ojpro8716 printer. Contact us on our toll-free number, our technical support will guide to resolve the difficulties and make your printer ready to print your desired documents.

    Disclaimer

    We are third-party service providers of different hardware, software, and other devices. We are an independent company, and do not have any association with top printer brands. The images, trademarks, videos included in this site are only for reference and information purposes. We don’t claim any ownership of them.

    123 HP Officejet Pro 8716
    Summary
    product image
    Author Rating
    1star1star1star1star1star
    Aggregate Rating
    no rating based on 0 votes
    Brand Name
    123 HP Officejet Pro 8716
    Product Name
    123.hp.com/ojpro8716