How To Install Printer HP Laserjet P1102 Windows 10?

HP OfficeJet 6600 is a versatile printer that can meet your office and home requirements. It offers a wide range of connectivity options, and you can easily install the HP OfficeJet 6600 printer on your computer. For the complete installation procedure of the HP OfficeJet 6600 printer, read this article throughout the end. Let us see how to Install Printer HP Laserjet P1102 Windows 10.

The below section explains how to install the HP LaserJet P1102 printer on the Windows 10 computer.

Before beginning the installation process, prepare your printer for it.

  • Turn on your printer and configure the initial settings, if you haven’t done it yet.
  • Load enough paper into the tray and install the ink cartridges in their slots.
  • Download the printer driver, if necessary.
  • Check if your Windows 10 computer meets the minimum system requirements of the printer.
  • Make sure that your HP printer is not connected to the computer using the USB cable.

Installing the HP LaserJet P1102 printer on the Windows 10 computer

You can install the printer on your Windows 10 computer in two different ways.

  • Using the printer software
  • Using the built-in driver
Install Printer HP Laserjet P1102 Windows 10


Method 1: Using the printer software

In this method, first, you have to download the HP LaserJet P1102 printer driver for your Windows 10 computer. Connect your printer to the computer using the USB cable. Run the installer file to complete the installation process.

Continue reading this page to know the installation process in detail.

Downloading the printer driver

  • Access your HP printer’s official support page.
  • Go to the Driver Download page by clicking the Software, Drivers and Firmware tab.
  • Check to make sure that the Windows 10 OS is selected under the Operating System section.
  • Choose the printer driver that you want and click the Download button.
  • Wait for the downloading process to complete.
  • Once it is done, you can begin the installation process as discussed below.

Installing the printer driver

  • Turn on your HP printer and connect it to the Windows 10 computer using the USB cable.
  • Open the Downloads folder.
  • Extract the printer driver file and store it in a separate folder.
  • Now, open the Control Panel application.
  • Click Devices and Printers > Add a printer > The printer that I want isn’t listed > Add a local or network printer with manual settings.
  • Now, from the “Use an existing port” drop-down menu, select any USB port of your preference and click Next.
  • On the “Install the printer driver” screen, click the Have Disk button and open the printer driver folder. Select the printer driver file and click Next > Next > Yes to install the driver.

Method 2: Using the built-in driver

  • Initially, make sure that your HP LaserJet P1102 printer is turned on.
  • Now, connect the printer to your computer using the USB cable.
  • Once the printer is detected, the “Found new hardware” message will be displayed on the screen.
  • Open the Add a printer or scanner window.
  • Click Add a printer or scanner > Add device.
  • Install the built-in software by following the instructions.

To know how to Install Printer HP Laserjet P1102 Windows 10, contact us.