[su_spacer]

How to do Unboxing 123.hp.com/setup 8720?

    123.hp.com/setup 8720
  • For Unboxing 123.hp.com/setup 8720, Open up the flaps on either side of the cardboard box delivered to you. Check if the box contains all the printer accessories as mentioned in the checklist.
  • Take the printer out from the box. Place it on a flat surface close to your computer. Peel off all the protective tapes on the printer.
  • Remove the packaging material from scanner glass, trays and carriage access area.
  • Unwrap the power cord and plug its one end into the appropriate port on the printer’s rear and the other end into a wall outlet.
  • Look for the Power icon on the control panel and tap it. Select your country/region and then touch Yes. Set the date and time, and then confirm it by touching Yes.
  • Draw the input tray out and slide-out the paper width guides. Place enough paper in it and adjust the guides. Re-insert the input tray. The next step is the installation of ink cartridges.
  • Open the carriage access door and wait for the carriage to halt. Unpack the new cartridges and insert it into the slot marked with the same letter as on the cartridge. Make sure the cartridges are correctly seated.
  • Repeat the steps to load the other cartridges. Close the carriage access door. Wait for the printer to align the printhead and print a calibration page.
  • The printer’s hardware setup is complete now. Install the printer driver using the CD or by downloading it from the manufacturer’s website.
  • Keep following the prompts on the installer and then 123.hp.com/setup 8720 the printer to your computer. Verify the connection by printing a document from your computer.