HP Officejet Pro 6830 Wireless setup for Windows
Step 1 : Discover the password from a system which is associated with the HP Officejet Pro 6830 wireless network
You can identify the password of your wireless network from a system that is associated with the wireless network. In order to look at the network security password on a Windows computer, access the network properties screen.
Step 1: Meet the requisites
- Be sure that you have an active wireless network.
- A system which is linked to the same network, either using Wi-Fi or an Ethernet cable.
- Setup and power up the HP Officejet pro 6830 printer.
Commence with the software installation
From the computer you wish to print from, select the upgraded printer driver and software installation. It enables the wireless 123.hp.com/ojpro6830 printer drivers and Printer Assistant software for scanning and other printer management functions.
- Trail the following method to start the software installation:
- If you have use an installation disc which supports the Windows system, place it into the computer disc drive and use the procedure to start the installation.
- Revert to our website and then click on the Downloads option. The full feature installation process initiates automatically after the software downloads.
- The software installation window proceeds until a Connect window opens. STOP at the connect window! Do not choose Continue at this point.
Step 2: Customize the default wireless settings on the printer
Rebooting the wireless settings enables you to verify that the connection completes successfully.
- Switch on the 123.hp.com/ojpro6830 printer.
- While your wireless light blinks, use the next step to continue installing the software.
- Long press on the printer power button at the time, tap on the Start Copy Black button twice and then go with Cancel button thrice.
- Release the power button. The wireless light in the wireless button must blinks, re- do the procedure if the wireless light does not blink.
- Go the next step to setup the software. You have approximately 20 minutes to accomplish the software setup using 123 hp ojpro 6830 auto wireless connect features.
Step 3: Directives to install the software
- Navigate to the HP installation Connect screen on the system, and then click on the Continue option.
- Here you are employed with the instructions until a Connection Options screen displays.
- Affirm that the power button light on the printer is fully glows and the wireless light is blinks. If the power button light does not blink properly, press it once until it becomes bright.
- In the Connection option screen, Select on the Wireless option and then click on the Next option.
- Once the software installation have been completed, affirm your network configuration, one of the screens exhibit to provide you with the best available method to complete the wireless setup.
- HP Auto Wireless Connect
- Wireless Setup Using a USB Connection
- Use the setup screen until an Active window screens. The 123.hp.com/ojpro6830 printer is set up and you can make an attempt to print or scan the document.
Step 1: Get your HP Officejet pro 6830 printer ready for the installation
Accumulate the requirements, and then ratify the printer and computer connections before setting up your 123 hp ojpro 6830 printer on the wireless network.
- The network name given is the Service Set identifier.
- The network password might also called as WEP key or WPA passphrase.
- Employ broadband Internet access.
- Establish a USB cable connection to transfer wireless settings to the 123.hp.com/ojpro6830 printer.
- Make sure that the router and the system are powered on, and link your system and the printer to the same wireless network. Locate your printer and the computer at a closer distance to the router during the setup process.
- Detach any USB cable from the printer.
Step 2: Directives to download and configure the driver
- Switch on your HP Officejet pro 6830 printer.
- Detach the cable from the system, when the printer is connected to the system via a USB cable.
- Direct to our website and then click on the Software and Driver Download option.
- If it is directed, select the method to identify your printer model, and then use the instructions to go to the download page.
- Click on the Download option which is seen next to the HP Easy start or the option next to the full feature driver, liable to the option that displays.
- Access the folder which is downloaded, and then open the HP Easy Start file or the updated driver .dmg file to commence the installation.
- When it is instructed by the installer, click on the Add Printer option to commence a print queue on your Mac device. Pick out the printer name, choose the Use or Print Using option, and click Add.
- Get back to the HP installer to finish the installation process.
123-hp.net is an independent service provider and the mention of brands, names, images and trademarks are purely for reference. We do not claim ownership of them unless stated. We aim to provide solution to resolve HP printer related issues.123.hp.com/ojpro6830