123 hp ojpro 8100 Wired Setup

Windows

Step 1: Examine the 123 hp ojpro 8100 requirements

Before you initiate the installation, make clear that your network router and the Ethernet cable are functioning properly.

  • Make clear that you are ready with a network router, switch or hub with sufficient number of ports.
  • Activate the connection on the router, switch, or hub if it was not done earlier.
  • Buy and use an Ethernet cable. You must use of only an Ethernet cable and not a telephone cable.

Step 2: Associate the computer to the active Internet connection

Trail the instructions in this manual to start the connection between the 123.hp.com/ojpro8100 printer and the network using an Ethernet cable.

  • Separate the plug or protective cover from the Ethernet port on the rear side of the printer.
  • It is must to attach the one end of the Ethernet cable to available printer’s port whereas the other end to the available port on the network router, switch or hub.

Step 3: Installation tips for better understanding

You are guided to download and install the recent 123.hp.com/ojpro8100 printer driver on the Mac computer. To obtain this, navigate to our website and make use the instructions to complete it. You are instructed to select the connection type, by the time go ahead with the Wired network option.

  • Maintain your HP Officejet Pro 8100 printer in the on state.
  • The USB cable that is employed should be detached from the printer.
  • Direct to our website where you can tap on the Software and Downloads option and start to download the printer driver.
  • When you are guided to select a method to discover the printer model you are using, select it and then follow the on- screen prompts. By doing so you will be diverted to the download page.
  • Choose the Download option that is placed near to the full featured driver or go with the Basic Drivers as an alternative option.

Mac

Connect your printer to connect over a Wired (Ethernet) network

To establish the proper network connection on the printer over a Wired network, the formerly thing you have to perform is to own an Ethernet cable and make a secure connection between the computer and the printer.

Step 1 : Analyze the requirements

Formerly, make confirm that the network router is in proper working condition, and then initialize the installation process.

  • Make clear that the network router, switch, or hub is available with required number of Ethernet ports.
  • Make clear that the computer is connected to the router, switch or hub. If it was not performed before, do the requirements.
  • Use a secured Ethernet cable only.

Step 2 : make a network connection to the printer

Trail the steps provided in this document to make a link to the printer and the network using an Ethernet cable.

  • Power on the HP Officejet Pro 8100 printer.
  • Let the rear side of the printer free from all the plug or protective covers.
  • Make clear that one end of the Ethernet cable is connected to the 123 hp ojpro 8100 printer port whereas the other end to the unused port on the network, router, switch, or hub.

Step 3 : Download and run the software on the printer

Get the recent updates for the printer driver for Mac computers from our website. When guided, connection type should be set as Wired network.

  • This is the time to power up the HP Officejet pro 8100 printer.
  • If you employ a USB cable before to connect the printer to the computer, it should be removed now.
  • Call our customer care support page to avail Software and Driver downloads.
  • Find a method to select the 123 HP ojpro8100 printer model, and then trail the on- screen prompts to navigate to the download page.
  • Click either on the Download option that locates next to HP Easy Start or succeeded by the full feature driver, liable to the options that get screened.
  • Now the downloads folder is screened. Instigate the installation process by choosing the HP Easy Start file or the full feature driver .dmg file.
  • Prepare your printer by trailing the instructions in this manual and start the installation process.
  • It is essential to choose the Add Printer option to create queue on the Mac if instructed.
  • You are guided to choose the printer name followed by tapping the Use or Print Using option in the sorted menu. Go and search for the 123 hp ojpro 8100 printer name and then tap on the Add option.
  • Re- directing to the HP installer let you finish the installation process.

Troubleshooting

Step 1 : Boot up the entire hardware

  • Remove the power cord from the router.
  • Switch off the    123 HP ojpro8100 printer and the system you are using.
  • Re- plug the power cord to the printer. Subsequently, pause for a while until the Internet activity light glows mentioning the normal connection status.
  • Power off the printer and the system.
  • Trail to install the 123 HP Officejet Pro 8100 printer driver and software once again.

Step 2 : Monitor the network and printer connection status

Make clear that the network you are using is functioning properly and the printer is all set for the network configuration.

  • Make clear that the printer is all set to initiate the network configuration: you are furnished with the prompts to be followed for both the Wired and Wireless connection.
  • Make clear that the printer is not in connection with the guest or host network.
  • If you own a double band router, make clear that 2.4 GHz band is setup. If the router is in connection with the 5 GHz band, the printer cannot be conencted to the network.
  • Switch on the system, check the network name and the password in the notification area.
  • Trail to install the 123 HP Officejet Pro 8100 printer driver and software again.

Step 3 : Trail to connect the printer manually to the network

Trail to link the printer to the network manually so that the HP installer can detect the printer. Employ Wireless Setup Wizard if you have touch or text- based control panel or try with Wi- Fi Protected Setup. Do the requirements, subsequently try to install the 123 hp ojpro 8100 printer driver and software again.

Step 4 : Enable the HP Print and Scan Doctor

  • Download the most recent updated firmware.
  • Affirm that the 123 hp ojpro 8100 printer is powered on, and is connected to the system, either via USB or a network.
  • Move to our website, click on the Software and Driver Download option, and then key in your 123 HP Officejet Pro 8100 printer model number.
  • Pick out the required operating system version.
  • Open the Firmware-> Download option.
  • Suppose the firmware section is not screened, a firmware upgrade is currently unavailable.
  • You can choose the Use HP Download and Install Assistant option and then select Install now.

Step 5 : Deactivate the firewall software on the system temporarily

Print and Scan Doctor aids you to discover and confirm the printing and scanning issues. Enable HP Print and Scan Doctor to quickly and automatically carry out various troubleshooting techniques to resolute the issues.

  • Revert to the Print and Scan Doctor window, and then tap Network.
  • From the drop- down menu, choose the Troubleshooting Firewalls option.
  • Select the Firewall which has been enabled, and then touch the Disable option.
  • Trail to install the 123 HP ojpro8100 printer driver and software again.

Step 6 : Uninstall directives for 123 hp ojpro 8100 Printer driver and software

  • If the printer is connected with the aid of USB cable, remove the cable from the printer.
  • Browse for the Windows for Programs and Features and then for Programs and Features in the exhibited list.
  • Under the list of the installed program, pick out your printer name and then touch the Uninstall option.
  • Trial the instructions to finish the software removal.
  • Boot up the entire print system.

Step 7 : HP software and printer driver reinstallation measures

Print and Scan Doctor aids you to discover and confirm the printing and scanning issues. Enable HP Print and Scan Doctor to quickly and automatically carry out various troubleshooting techniques to resolute the issues.

  • Power on the 123 hp ojpro 8100 printer.
  • If you have connected the printer to the computer with the aid of the USB cable, kindly de-link the connection.
  • Direct to our website to avail Software and Driver Downloads.
  • Touch the Download option that is located next to the full feature driver, or go with the Basic Drivers for the rest of driver options.

Disclaimer

123-hp.net is an independent service provider and the mention of brands, names, images and trademarks are purely for reference. We do not claim ownership of them unless stated. We aim to provide solution to resolve HP printer related issues.

123.hp.com/ojpro8100
Summary
product image
Author Rating
1star1star1star1stargray
Aggregate Rating
no rating based on 0 votes
Brand Name
123.hp.com/ojpro8100
Product Name
123 HP Officejet Pro 8100