HP 5643 Printer

First Time Printer Setup

Step 1 : Unload the printer from the box

  • Take away the printer and all materials like tape and packing materials from the box.
  • Raise the scanner lid.
  • Unwrap all tape and packing materials from the scanner glass.
  • Close the scanner lid.
  • Open the ink cartridge access door, and then remove all tape and packing materials inside the printer.
  • Shut down the cartridge access door.
  • Clasp the handle on the paper tray and eliminate the output tray, and then take away all tape and packing materials from the photo tray.
  • With the paper tray pulled out, shove in the photo tray.
  • Substitute the output tray on the paper tray, and then shove in the paper tray until it clicks into the correct position.

Step 2 : Check the contents of the box

Ensure that you take out all hardware and materials from the box afore disposal or reprocessing the box.

Step 3 : Place the paper into the paper tray

  • Clutch the handle on the input tray, and then pull the tray near you to open it.
  • The Close Tray screen exhibits on the printer control panel with the message, ‘A paper tray is accessed. Shut down the tray to proceed. Tap to view paper loading instructions.’
  • With the paper tray pulled out, shove in the photo tray.
  • Place the white paper into the paper tray.
  • Pull the paper tray until it fixes into the correct place.

Step 4 : Plug the power cord and set your choices

  • Fix the power cord to the back of the printer, and then connect the other end of the power cord into an electrical socket.
  • Press the Power button to switch on the printer.
  • On the printer’s control panel, select your preferred language country or region, fix month, date, year, and then tap Continue to ratify your choice.

Step 5 : Position the ink cartridges

  • Open the cartridge access door.
  • A Change Ink option might show in the home screen.
  • Remove one of the cartridges from its bundle.
  • Glide the new cartridge at a upward angle into the blank slot, and then push up the cartridge:
  • Position the tri-color cartridge into left slot and black cartridge into the right slot.
  • Reiterate these steps to position the other cartridge.
  • Shut down the cartridge access door and select OK.
  • Delay for the printer to calibrate and line up the cartridges. After the alignment is done, select OK.
Disclaimer

123-hp.net is an independent service provider and the mention of brands, names, images and trademarks are purely for reference. We do not claim ownership of them unless stated. We aim to provide solution to resolve HP printer related issues.